Description

The Hesychia SIXK-H is the HUB variant of the original Hesychia SIXK. We approved the following mounting systems:

Rearden Atlas Plan B

HUXWRX Hub QD Adapter 2.0
IDG will be releasing a HUB adaptor with the Hesion Bow integration in the future, which will also have full warranty coverage. WE DO NOT WARRANTY ANY OTHER HUB adaptors for issues due to walk-off, misalignment, and/or improper muzzle device and adapter installation. Warranty does NOT cover any other manufacturer mounting solutions. If you have any questions, please reach out to us directly at info@irregulardesigngroup.com
We fully warranty the listed mounting systems and are testing others. We'll add more in the future if they meet our quality and consistency standards.

*HUB ADAPTER AND MUZZLE DEVICE NOT INCLUDED

SPECS

FEATURES

CARE

WHAT IS IN THE BOX

CALIBER RATING	6MM ARC, 5.56MM NATO
OVERALL LENGTH	4.825"
DIAMETER	1.65"
WEIGHT	11.6 oz.
MATERIAL	INCONEL 718
CONSTRUCTION	LPBF
FINISH	HIGH TEMP CERAKOTE®, RAW
MOUNT	HUB ADAPTER
BARREL RESTRICTIONS	10.3" MINIMUM
FULL AUTO RATED	YES
INTERNAL THREAD	1.375x24

OVERVIEW

HESYCHIA SIXK HUB: Multi-Stage Hybrid Suppressor

HUB Adapter

The Hesychia SIXK-H suppressor is designed to work with Hub adaptors. We recommend the Reardon Plan-B system (link) and offer FULL WARRANTY for the Reardon system. WE DO NOT WARRANTY ANY OTHER Hub adaptors for issues due to walkoff or misalignment from MD/adaptor. The first blast baffle has a standoff of 1.64". Warranty does NOT cover Keymo.

Multi-Stage Hybrid Core

Engineered for control, this core reduces backpressure, noise, and flash while venting gas forward to protect shooter and firearm. Asymmetric baffles maximize harmonic disruption and gas diversion, paired with internal helical annular pathways that extend off-gassing duration from the blast chamber and main stack. Recessed flash-hiding geometry eliminates snag hazards, with special tines filtering unburnt powder to cut external flash. Disruptive micro-texturing on internal gas paths boosts turbulence without fouling.

CLEANING SCHEDULE

No matter what anyone claims, silencers need to be cleaned periodically to avoid particulate build up and optimize performance. Here are a few ways you can tell if it is time to clean it:

Weight Increase and Cleaning: To monitor carbon buildup, weigh your suppressor when it’s new and record its baseline weight. After around 3,000 rounds, you’ll typically notice significant accumulation. An increase of 2 ounces or more is a strong indicator it’s time for cleaning. Use an ultrasonic bath with a 50/50 mix of water and Simple Green for best results. Cleaners with heaters work better, as the heat helps break down carbon more effectively than room-temperature solutions. Depending on the cleaner’s power and tank size, 15-20 minutes of hot ultrasonic cleaning should suffice. For heavy buildup, multiple cycles may be required. If so, fire a few rounds through the suppressor between cycles—this helps loosen the carbon, allowing the cleaning solution to penetrate deeper.

Performance Indicators: More than weight alone, pay attention to changes in performance. If the suppressor feels heavier and you notice increased backpressure, reduced sound suppression, or a shift in point of impact, it’s likely time to clean. Carbon buildup can clog baffles, reducing efficiency.

1	HESYCHIA SIXK HUB SUPPRESSOR	$850
1	PRODUCT INFO CARD
2	IRREGULAR DESIGN GROUP STICKERS
1	SUPPRESSOR DISPLAY STAND

GRANTS PASS, OR

LANCASTER, OH

ADVANCED WEAPON SYSTEM DESIGN AND MANUFACTURING

MADE IN USA

CONTACT US

info@irregulardesigngroup.com

HESYCHIA SIXK-H HUB

Write a Review